Product information "Power optimiser S500-1GM4MRM SolarEdge"
The SolarEdge S500 Power Optimiser helps to increase the energy production of each module in your PV installation.
It has been specifically designed to work with SolarEdge inverters and provides a unique solution to prevent problems with module mismatch or partial shading. It detects unnatural connector behaviour, preventing potential hazards. Reduces the voltage of each module during installation or in case of fire.
Distinguishing features of the SolarEdge S500 Optimiser:
- Up to 25% more energy
- High level of efficiency of 99.5%
- Quick installation with a single screw
- Separate monitoring for each module allows easier system management
- Reduces the voltage of each module - at installation or in case of fire.
- System design maximises space utilisation for higher yields.
- The technology used prevents problems in case of module mismatch or partial shading.
Cable length:
- input wires 0.1 m
- output wires 2,3 m
Maximum power per string - inverter HD-wave [W]: | 5700 |
---|---|
Maximum power per string - inverter three phase [W]: | 11250 |
Maximum string length - inverter HD-wave and single phase / number of optimizers and PV modules: | 25 |
Maximum string length - inverter three phase / number of optimizers and PV modules: | 50 |
Minimum string length - inverter HD-wave and single phase / number of optimizers and PV modules: | 8 |
Minimum string length - inverter three phase / number of optimizers and PV modules: | 16 |
Power [W]: | 500 |
Type: | Optimisation |
Max. voltage [V]: | 60 |
Min. MPPT voltage [V]: | 8 |
Max. MPPT voltage [V]: | 60 |
Max. short-circuit current per MPPT [A]: | 14.5 |
Supported number of PV modules: | 1 |
Euro efficiency [%]: | 98.6 |
Max. efficiency [%]: | 99.5 |
Dimensions [mm]: | 129 x 155 x 30 |
Weight [kg]: | 0.655 |
Product Warranty: | 25 years |